An aliphatic polyurethane-based for multifunctional coating. Designed to provide high gloss, outstanding abrasion,
and good chemical and stain resistance. Shows excellent color and gloss retention during extended services.
An ideal topcoat for tanks, piping, structural steel, concrete walls and floors, industrial plants such as power, pulp and
paper, food and beverage, and wastewater treatment. and chemical and petrochemical; and marine structures
Theoretical Coverage: 20 – 25 sqm / 4L / coat
Color: As per request
Finish: Gloss
Component: 2
Mixing Ratio (by volume): 3.2 parts (resin): 0.8 part (cure)
Applied Over: Prepared Steel
Surface Preparation: SSPC – SP 6 / 2 / 3
Method of Application: Brush / Roller / Spray
Pot-life: 2 hours*
Do not mix more material than will be used within the pot-life time
Drying Time:
2 – 3 hours (touch)
10 hours (through)
No. of Coats: 1 – 2 coats
Recoating Time: 5 hours
Reducer: BC Ultratex Thinner
Chemical Resistance
Temperature: Withstands continuous dry heat up to 90°C; intermittent up to 120°C
Weatherability: Excellent under marine and industrial environment.
Solvents: Withstands intermittent splash and spill of aromatic solvents and other solvents like ketones and esters.
Acids: Resistant to diluted acids. Not recommended for resistance to strong
oxidizing acids such as sulfuric, nitric, and chromic, or to strong concentrations of acetic and formic acids.
Alkalis, Salts: Excellent for common alkalis and salts.
Water: Excellent. Resists exposure to fresh and seawater.
Note: Consult Builder's Choice representative for certain chemical concentrations and for specific services.
Packaging : 4L cans
Colors are available upon request. Color matching and customization are also offered for volume requirements.
Disclaimer: The information provided on this page applies exclusively to Builder's Choice products.