It's all about making the right choice.

EPOXY PRIMER • EPOXY TOPCOAT

A two-component epoxy-polyamide-based paint especially formulated for industrial use to produce hard, tough, and abrasion-resistant film. It gives excellent adhesion to various substrates and provides corrosion resistance to steel.

An ideal coating for areas where resistance to industrial conditions is desired. It is also suitable as an interior tank lining for potable water.

• Actual Coverage: 20-25sqm / 4L / coat (depending upon surface conditions)

• Drying Time: 

  • Set to touch – 15 to 30 minutes

  • Dry Hard – 6 to 8 hours

  • Dry Through – 24 hours

• Finish 

  • Primer: Flat 

  • Topcoat: Gloss 

• Method Application: Brush/ Roller/ Spray

• No. of Components: Two (2) 

• No. of Coats: 1-2 coats

• Mixing Ratio (by volume): 3parts Resin:1 part Cure 

• Induction Time: 15-30 minutes 

• Thinner: Epoxy Reducer

• % Reduction: Unnecessary. But if required to obtain desired properties, 5% reduction may be done

• Pot Life: 6-8 hours 

• Packaging : 4L/16L

Chemical Resistance

Temperature: Withstands continuous dry heat up to 120 °C

Weatherability: Excellent under marine and industrial environments

Solvents: Withstands intermittent splash and spill of aromatic solvents and other solvents like ketones and esters

Acids: Resistant to diluted acids. Not recommended for resistance to strong oxidizing acids such as sulfuric, nitric, and chromic, or to strong concentrations of acetic and formic acids

Alkalis, Salts: Resistant to common alkalis and salts

Water: Excellent. Resists exposure to fresh and seawater

Note: Consult Builder's Choice representative for certain chemical concentrations and for specific services.