Magic Paint ® is specifically formulated to turn the plain wall into whiteboard-like surface and to protect the wall from stain.
It gives excellent durability and it is also resistant to alcohols. Suitable for every type of cement surface, gypsum board, wood and steel.
|Theoretical Coverage||25 – 30 sqm / 4L / coat||Method of Application||Brush – animal hair Roller – foam type Spray|
|Component||2||Drying Time||4 – 6 hours (surface dry)|
|Applied Over||Primed and Smooth Surface||7 days (ready-to-use)|
|Mixing Ratio (by volume)||3.0 parts (resin) : 1.0 part (cure)||Recoating Time||24 Hours|
|Reducer||Water||No. of Coats||2 coats|
Surface must be smooth and free from oil, grease and dustApplication
Stir each component thoroughly before use. Mix to uniform consistency 3.0 parts of A (resin) with 1.0 parts of B (catalyst) by volume. Mix within 2-4 minutes or until the mixture is homogenous. Mixed component should be applied within 30 minutes. If necessary, reduce with water by 5-8% reduction. Apply an even coat.Equipment Clean-up
Do not allow the paint to dry on the equipment. Use water as the cleaning solvent.Safety Precautions
Thoroughly wash hands after application. Avoid contact with eyes and skin. Wear suitable protective clothing such as overalls, gloves and goggles. Use a dust mask/particulate respirator if applying by spray.
|Eyes||In the event of accidental splashes, flush eyes with warm water immediately. Then seek medical advice.|
|Skin||Wash skin thoroughly with soap and water.|
|Inhalation||Move to fresh air, loosen collar and keep patient rested|
|Ingestion||In case of accidental ingestion, DO NOT INDUCE VOMITING. Obtain immediate medical attention. For|